Cart
← Back to Product Catalog

PINANSON – Press Splitter SA SMC DANTE

I/O Interfaces

More details

Similar Products

Dante官网logo
  • BARE

BARE – G-10AD

Features: The exquisite and minimal structural design highlights the modern atmosphere and conforms to ergonomics. Special electret capacitive dual microphone core design, clear and bright sound quality, high sensitivity; Support mainstream network audio protocols, use network cables to connect to the switch, and transmit audio in the network to realize signal interconnection and intercommunication; Using POE (Power over Ethernet) power supply and analog phantom power supply, digital and analog dual backup, the system is more stable. Provide standard balanced XLR interface to transmit analog audio: Provide standard RJ45 network interface to transmit digital audio: The entire expandable Dante system has 512 two-way audio channels; Original microphone adjustable directivity technology, supports 5 modes: omnidirectional, cardioid directivity, super cardioid directivity, sharp cardioid directivity, figure 8 directivity, etc. Equipped with 5 switch mode options: 1. Power-on mute mode, then press to speak; 2. Power-on speaking mode, and then press mute; 3. Long press the speaking mode to release the mute; 4. Long press the mute mode to release the speech; 5. , Voice control mode; Customizable remote control switch Anti-radio frequency and mobile phone interference; The base is equipped with damping rubber to effectively reduce the noise caused by external vibration to the microphone.
    I/O Interfaces
See the product
Dante官网logo
  • BARE

BARE – DE-8

Features： 1. The audio signal and power transmission of the speaker are realized through the same network cable. 2. The RJ45 interface on the back panel of the box is equipped with XLR firmware, which can be used for waterproofing and strengthen the connection between the box and the wire. 3. The network cable realizes signal transmission and power supply; 4. The IP address is automatically assigned through the router DHCP; 5. Each receiving channel can be controlled independently, and it can be applied to any location in the local area network 1. It has high efficiency and high sound energy output, excellent sound quality, perfect protection function and good electromagnetic compatibility characteristics. 7. The built-in DSP network active speaker can remotely control the EQ and pressure limit of the active speaker on the PC side. 8. It has complete protection functions (short circuit protection, over current protection, over and under protection, DC protection, power limit, temperature limit, long-term output power limit, clipping limiter). 9. The speaker uses Dante digital audio interface and PoE network power supply to drive the power amplifier module, and only one network cable is needed to realize the simultaneous supply of audio signal and power.
    I/O Interfaces
  • Dante Ch: 8 In
See the product
Dante官网logo
  • BARE

BARE – BE-0808D

The network audio processing center is a network audio processor with 16 inputs (8 analog and 8 digital) and 16 outputs (8 analog and 8 digital), using the industry-leading ADI DSP SHARC21489 chip, The highest operating frequency can reach 450MHz. The input and output modules of the DSP can be customized according to the actual situation. At the same time, it has independent AFC, AEC, ANS, AGC, gain sharing automatic mixing, threshold automatic mixing and other processing modules to meet the needs of audio processors and transmissions in various places. Such as meeting rooms, multi-function halls, conference center auditoriums, administrative centers, etc.
    I/O Interfaces
See the product