Powersoft – T302


More details

Similar Products

  • Adam Hall Group

Adam Hall – LD Systems DQOR SUB 8 D

Part of the DQOR® series, the DQOR® SUB 8 D is a powered installation indoor/outdoor subwoofer with an 8" woofer and a 10" passive radiator. With a built in Dante audio connection, it easily connects to any networked audio system and is AES67 compliant for compatibility with thousands of audio devices.

Designed for high performance in a compact form factor, it delivers powerful bass audio with no need for separate amplifier racks.

Uniquely the DQOR® SUB 8 D is the only outdoor rated Dante sub bass loudspeaker available.

The clean and low-profile design ensures the DQOR® SUB 8 D is a sleek addition to any room, combining aesthetics with powerful audio performance. Rated at 190 W RMS and max power of 230 W, it delivers impressive sound quality at up to 108 dB SPL with low frequency extension down to 37 Hz.

The DQOR® SUB 8 D has rubber feet for floor mounting, or it can be easily installed with the optional surface mount bracket, which includes flexible mounting options, holes for clean cable management, locking screws, a safety-locking mechanism, and a hinge mechanism for quick setup.

AC inputs are connected with a 3-pole phoenix contact terminal block with lever push-in connector for reliable and safe connection of the power cables. Terminal block connectors allow for remote standby control. 

The DQOR® SUB 8 D can be used in a wide variety of applications both inside and outside including hospitality, retail, entertainment, or corporate settings.

It is available in black or white (RAL9005 & RAL9016).

    Amplifiers
  • Dante Ch: 2 In
  • 24-bit, 32-bit
  • Biamp

Voltera – D-1200-2M

Audio DSP and amplified loudspeaker controller; 2 channels sharing 1200W with Dante and AVB. Key Features
  • Powerful onboard DSP with ample headroom for large systems – the equivalent of a TesiraFORTÉ for Tesira custom processing and hosting of expanders
  • 2 class D channels sharing 1200 watts
  • Power sharing provides up to 83% of total power or 1000 W through any single channel
  • High peak voltage output capability: 145 Vpk
  • Each channel can drive low impedance (2.7, 4, 8, and 16 ohm), 70V, or 100V
  • Each model supports AVB, Dante, and AES67
  • Accurate raised cosine EQ for the entire frequency band
  • Group-controlled raised cosine EQ making it attractive for tuning large systems
  • Comprehensive amplifier limiter scheme avoids protective mutes and shutdowns
  • Processor can be sustained through POE – no main power required and no reboots
  • Support for failover-to-analog from networked audio input operation
  • 5-year warranty
  • Compliant with the US Trade Agreement Act (TAA)
  • Biamp Workplace Ready
    Amplifiers
  • Dante Ch: 32x32
  • 24-bit
800x450_GTAQuattro
  • Outline

Outline – GTA Quattro

The GTA Quattro has been designed to be versatile and easy to use in any operation condition. Equally useful for most subwoofers as well as high power fullrange systems, Outline GTA Quattro suites any configuration and purpose.

Ultimately flexible and safe, Outline’s power supply is now suitable to Single Phase, Bi-Phase or Three Phase operation from 85 VAC up to 460 VAC without need of selection. True Three Phase load balancing is directly achievable by the unit without any complex load assignment in the power distribution system. Outline GTA Quattro provides four fully processable channels and selectable inputs from analog sources as well as digital AES3 and two redundant Dante™* streams. Channel mixing and routing can be easily performed thanks to the integrated revolutionary low latency DSP, providing the highest degree of freedom in sound shaping and speaker management.

Full support to 100 Mbps and Gigabit Ethernet makes it easy to integrate Outline GTA Quattro into any existing infrastructure. Completely integrated into Armonía Pro Audio Suite™, the new GTA Quattro interface is also available for smartphone and tablet, providing a new experience in power management.

    Amplifiers