Rane - DANTEx

Rane – DANTEx

Product Information

The DANTEx is an optional plug-in card for the Rane Terminal 1010x that allows system designers to integrate a Terminal 1010x processor with Dante-equipped microphones, amplifiers, breakout boxes, mixing consoles and other supported devices. It provides 32 inputs and 32 outputs of Dante digital audio with supported samples rates of 44.1kHz, 48kHz, 88.2kHz and 96kHz. Built-in sample rate conversion (SRC) converts the Dante sample rate to the fixed 48kHz sample rate required by the Terminal 1010x.

The Dante interface is managed using Audinate’s Dante Controller software. Dante controller is a free software application that enables the user to route and configure devices on a Dante network.

Specifications

Dante Ch: 32x32
Bit Depth: 24-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz

Allen & Heath – SQ Dante

SQ Dante provides any SQ mixer with a full 64x64 channel, 96kHz or 48kHz interface to a Dante network. An SQ fitted with the Dante option card can seamlessly connect to amplifiers, preamps and other devices on the Dante network, making full use of SQ's high resolution 96kHz audio.The SQ Dante card can be switched between 96kHz or 48kHz to accommodate Dante networks running at either sample rate. In addition to facilitating system integration, the card also enables digital splits and affordable multitrack recording direct to a computer.

Dante Interface Cards

Dante Ch: 64x64
24-bit

See the product

Midas

Midas – M32

The M32 is a live performance and studio recording digital console with up to 40 simultaneous input channels. It includes 32 award-winning MIDAS microphone preamplifiers, 25 time-aligned and phase-coherent mix buses and Dante network connectivity when including the DN32-DANTE card. By installing the DN32-DANTE card in place of the DN32-USB card, your M32 will interface with Dante networks using virtually any 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS – providing dependable multi-channel audio that coexist with other IP-based data traffic on the same network. The DN32-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low latency, ensuring the highest audio integrity. And a secondary input allows you to set up a seamless, redundant network. Full remote control of the M32 is possible using the integrated Ethernet switch. When the DN32-DANTE card is connected to a computer, Audinate’s Dante Controller application gives you full control over configuration and signal routing among your Dante-enabled devices.

Dante Interface Cards

Dante Ch: 32x32
24-bit

See the product

Kingray

Kingray – MDT44-E1

▲ 4 audio (digital signal) inputs, 2 audio (digital signal) outputs, external GPIO

▲ ARM processor cooperates with embedded operating system to expand Cirrus Logic Audio Codec

▲ 24-bit, Σ- △ AD / DA, 44.1kHz, 48kHz, 88.2kHz, 96kHz sampling rates are optional,

▲ I2S digital audio format

▲ Freely set the sampling rate and equipment name

▲ Network audio transmission and control use standard Category 5 network cable (CAT5)

▲ Supports PCM16, PCM24, and PCM32 encodings, and can also use custom encoding formats

Dante Interface Cards

See the product

Rane – DANTEx

Product Information

Specifications

Similar Products

Allen & Heath – SQ Dante

Midas – M32

Kingray – MDT44-E1

Stay connected to Dante

Support

Company

Dante Networking Alliance