Sonifex - AVN-AI16 16 Input Dante® Interface, PoE

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Product Information

The AVN-AI16 audio converter and interface converts up to sixteen analogue inputs to the Dante Audio-over-IP networking standard. This cost effective 1U rack-mount unit offers an easy solution for AV professionals and system integrators. It is simple to configure and operate, with all set-up, except line-up levels, done via the standard Dante Controller software and power via PoE (Power Over Ethernet).

All analogue inputs are on high-quality Neutrik XLR connectors and there are front panel status/confidence LEDs for PoE, Link, and Clock. Global 0dBFS line-up can be set to +12dBu, +18dBu or +24dBu to meet your specific requirement via the front panel recessed toggle switch.

Specifications

Dante Output Channels: 16
Bit Depth: 16-bit, 24-bit, 32-bit
Sample Rate: 44.1kHz, 48kHz, 88.2kHz, 96kHz, 176.4kHz, 192kHz
AES67 Enabled

Calrec – RP1

Calrec's RP1 is a remote production console that gives broadcasters the ability to capture a wide range of live events, such as regional sports, news or music festivals, and mix them in a remote facility hundreds or thousands of miles away.

I/O Interfaces

Dante Ch: 2x2
48kHz

See the product

AudioScience

AudioScience – Iyo 8.8M

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 8.8M provides 8x8 balanced analog audio inputs and outputs. Each input accommodates microphone through line level signals with a gain range of -60 to +24dBu. +48V phantom power is individually switchable on each input. Output levels are configurable up to +24dBu. RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status. The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller. Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack. All units can also be operated in AES67 interoperability mode.

I/O Interfaces

Dante Ch: 32x32
24-bit

See the product

TASCAM

TASCAM – MM-2D/IN-E

Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. Built-in DSP 2 mic/line input / 2 line output Dante converter to respond to various needs of contractor market and professional audio scene. The MM-2D-E is a compact converter that converts 2-channel mic/line input/output signals into Dante signals. With half the size of a standard 1U rack, the MM-2D-E is suitable for different Dante systems as an exquisite analog output unit. The built-in DSP mixer enables small scale systems to fully perform with a variety of input/output models the TASCAM Dante Compact Processor Series offers. MM-2D-E supports up to 96kHz/24bit and uses Euroblock connectors for analog mic/line input/output.

I/O Interfaces

Dante Ch: 4x4
16-bit, 24-bit

See the product

Sonifex – AVN-AI16 16 Input Dante® Interface, PoE

Product Information

Specifications

Similar Products

Calrec – RP1

AudioScience – Iyo 8.8M

TASCAM – MM-2D/IN-E

Stay connected to Dante

Support

Company

Dante Networking Alliance