The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks.
The A32 provides SSL SuperAnalogueTM I/O to Dante and AES 67 based IP networks. A32 includes redundant network connections* and PSUs. It features 32 line inputs and 32 line outputs.
The DIO1600 is a Dante enabled interface converting sixteen analogue line level inputs and sixteen analogue line level outputs to the audio network. All inputs and outputs have adjustable gain from +12dB to -12dB. The XLR version may be specified with XLRs on the front, network connections on the rear or XLRs on the rear, network connections on the front. It can also be supplied in a 1RU format with Tascam standard audio connections similar to the DIO1616MA below. Network connections may be copper and/or fibre via two SFPs and the unit includes secondary ports for network redundancy. The DIO1600 is PoE enabled so may be operated without a mains supply if required. The unit also has a 100-240V AC mains inlet and also supports 12 volt operation so may be effectively used with a redundant power supply. All level controls are adjusted using the built in web server. The unit will operate at sample rates of 48kHz and 96kHz and may also be used in AES67 mode.
The Iyo Dante® is a
cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces
in a 1U rack mount format. The 8.8MD provides 8x8 balanced analog audio inputs
and outputs. Each input accommodates microphone through line level signals with
a gain range of -60 to +24dBu. +48V phantom power is individually switchable on
each input. Output levels are configurable up to +24dBu. With DB-25/AES59
terminations.
RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming
status.
The Iyo family feature an embedded web server, allowing configuration and
monitoring of input and output levels. Routing is achieved using the Dante
Controller.
Power is provided from a built-in universal AC power supply. Redundant power is
available using an external 12VDC supply via a locking 2.1mm jack.
All units can also be operated in Livewire+ AES67 interoperability mode.
