Cart
← Back to Product Catalog

Visionary Solutions – D250L

I/O Interfaces

More details

Similar Products

rts-omneo-oei-2|rts-omneo-oei-2
  • RTS

RTS – OEI-2

The OEI-2 enables connectivity between analogue audio sources and legacy RTS key panels and an OMNEO network. This allows users to maintain existing infrastructure and the equity of their original equipment investment while updating to high-performance OMNEO media networking architecture.
  • Provides an interface between legacy RTS key panels and RTS OMI OMNEO interface cards for ADAM and ADAM-M units.
  • Support for both USOC or 586B wiring.
  • Provides less than 20 ms of audio latency in typical network installations.
  • Provides a frequency response of 20 Hz to 20 KHz to the keypanel.
  • Supports DHCP and device discovery for easy set up and network management.
  • Optional fibre connection – multi-mode or single-mode available.
  • Supports CAT-5/5e and CAT-6 with dual Ethernet connectors for device looping.
  • Supports compatibility with third-party Dante™
    I/O Interfaces
  • AES67 Enabled
See the product
AudioScience - Iyo Dante
  • AudioScience

AudioScience – Iyo Dante 0.32L

The Iyo Dante® is a cost-effective family of microphone/line Dante audio-over-IP (AoIP) interfaces in a 1U rack mount format. The 0.32L provides 32 balanced outputs. The output levels are configurable up to +24dBu. With terminal block termination.

RGB LEDs on the Iyo’s front panel show per channel audio levels and streaming status.

The Iyo family feature an embedded web server, allowing configuration and monitoring of input and output levels. Routing is achieved using the Dante Controller.

Power is provided from a built-in universal AC power supply. Redundant power is available using an external 12VDC supply via a locking 2.1mm jack.

All units can also be operated in Livewire+ AES67 interoperability mode.

    I/O Interfaces
  • Dante Ch: 32 In
  • 16-bit, 24-bit, 32-bit
See the product
Model 544D Audio Interface
  • Studio Technologies

Model 544D Audio Interface

he Model 544D is an audio interface that supports Dante networking and provides two analog line-level inputs and two analog line-level outputs. Also includes two installer-accessible general-purpose inputs (GPI) and general-purpose outputs (GPO). The Model 544D is designed to serve as a dual-channel analog input/output interface for various applications. Configured using the STcontroller software application. Housed in a lightweight tabletop enclosure; optional mounting kits available. Power-over-Ethernet (PoE) powered. Can also be powered by 12 volts DC.
    I/O Interfaces
  • Dante Ch: 2x2
  • 24-bit
See the product