Cart
← Back to Product Catalog

Yamaha – RIVAGE PM10

I/O Interfaces

More details

Similar Products

auvitran-AV-WALL-DT4i
  • Auvitran

Auvitran – AV-WALL-DT4i

The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm, designed to fit into a single-gang junction box (European format). It offers 2 XLR Mic inputs with 64dB gain and a line-in stereo mini Jack with 40dB gain. Gain can be controlled remotely (network) or locally (rotary button). The AV-WALL-DT4i Dante Mic/Line Interface is a cost-effective wall box in an incredible small size of less than 45x45mm. The AV-WALL-DT4i offers 64dB of true preamp gain on 2 professional XLR Mic inputs and 40dB of gain at line level on a stereo mini Jack connector. Gain can be controlled remotely via network or locally via direct rotary push button. Internal connector allows for link with optional Bluetooth extension Wall-Plate. The AV-WALL-DT4i is designed to fit into a single-gang junction box of only 45x45mm fitting small European format. AV-WALL-DT4i is PoE enabled and thus power, control and audio data connectivity is provided by a single CAT‐5e/6 cable. The size of the main box is 44.6 x 44.6 x 50 mm. It is compatible with “Mosaic” plate of Legrand®. The depth can be adjusted between 26 to 43 mm to fit near any wall depths. Wall plate size may vary depending of the region.
    I/O Interfaces
  • Dante Ch: 4 Out
  • 24-bit, 32-bit
See the product
RedNet1_Chassis
  • Focusrite

Focusrite – RedNet 1 Native 8×8 bundle

RedNet Native 8x8 Analog I/O System is the easiest way to add world-class conversion to your DAW, whether you use Cubase, Nuendo, Logic, Pro Tools software, or other DAW for Mac or PC. Comprising RedNet 1, RedNet PCIe, Sonnet Echo Express SE I Thunderbolt chassis and a preconfigured Ethernet switch, this package includes everything you need to get started. Just add computer and DAW software. With dynamic range of 119dB and incredibly low distortion, the RedNet converters will deliver pristine results every time whether tracking or mixing. RedNet PCIe provides true analog-round-trip latency of just 2.0ms at 96kHz allowing cue-mixes to be set up in the DAW software rather than a separate cue mix application. Included
  • RedNet 1 – Eight Channel AD/DA Converter
  • RedNet PCIe Card – 128 Channel I/O
  • Sonnet Echo Express SE I
  • Cisco SG200-08 8-port Gigabit Smart Switch – Pre-Configured (limited time offer)
Software available upon registration:
  • Focusrite Red 2 & Red 3 Plug in Suite
  • Dante Virtual Soundcard
Find a Dealer
    I/O Interfaces
See the product
equipson-dd2
  • WorkPro

WorkPro – DD2

DD2 devices are gateways used to convert DANTETM (Digital Audio Network Through Ethernet - developed by AUDINATE) protocol. These devices allow the extraction of analog audio signals from the DANTETM network as well as the introduction of analog channels within the same network.

DD2 is a device designed for use in installation, for which the analog inputs and outputs are made through Euroblock 3.5mm connectors.

It has balanced inputs and outputs to provide greater immunity to noise that interferes with audio signal lines.

    I/O Interfaces
  • Dante Ch: 2x2
  • 16-bit, 24-bit, 32-bit
See the product