Dante-enabled Product Catalog

DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall. High quality CLASS-D 4CH Professional Amplifier DSA-2000Q is a High Performance Class-D Power Amplifier using SMPS power and can reproduce high-quality audio in various environments such as auditorium and performance hall.   4CH Dante™ Digital Audio Input You can input 4CH Dante™ digital audio through the network port and 4CH analog audio inputs.   Built-in DSP Parametric 8 band EQ, crossover filtear using HPF and LPF,delay, attack / release adjustable limiter.   Easy control of equipment through front panel with OLED and PC GUI Using OLED and operation switches installed on the front, and DSA-500Q dedicated software, various parameters can be adjusted.   Easy one-touch front dust filter cleaning It is possible to remove the front dust filter easily by separating the ventilator on the front of the equipment by one-touch method.   Simultaneous control of multiple amplifiers via PC GUI The PC GUI allows intuitive manipulation of various functions of the DSP, and simultaneous control of multiple amplifiers through IP registration of the equipments.   Up to 340 ms delay time adjustable When configuring a system with multiple speakers, you can adjust the Delay function to control the audio transmission time up to 340 msec for clear sound.   Frequency band adjustment using HPF and LPF You can use the Butterworth / Bassel / Linkwithz-Riley filter to adjust the frequency band required for your speakers.   Unlimited preset creation for environment-optimization Up to 10 presets can be saved to the internal memory of the device. In addition, environment parameters can be saved to a PC as a file via the PC GUI and can be easily managed without restriction on the number of files.

The AKF1600 is an intelligent amplifier with 4 inputs/outputs and a built in high performance DSP.

Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Now you can power SSP6 Multiducers using audio from your Dante network. The LZ220 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. The amp uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Specifications

• Configurations
  • 4/8/16 Ω
• Power Output
  • 2 x 20W
• Control Options
  • Dante®
• DSP processes/EQ
  • EQ optimized for SSP6
• Frequency Response
  • 20 Hz – 20 kHz, 4/8 Ω
• Connectors
  • Input: Dante (RJ45) 
  • Output: Euroblock
• Regulatory
  • UL 2043 listed, CE, RoHS
• Weight
  • 0.60 lbs (0.27 kg)
• Dimensions
  • 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. Now you can power SSP6 Multiducers using audio from your Dante network. The CV140 amp is a single cable device designed for use in small or medium zones, with no need for a local power outlet. It uses a 60W port on a PoE++ switch (or comparable injector) with the convenience of either low impedance or constant voltage speaker outputs. The CV140 provies 1 channel of 40 watts at 70V/100V.   Specifications:

• Configurations
  • 70/100V
• Power Output
  • 1 x 40W
• Control Options
  • Dante®
• DSP processes/EQ
  • EQ optimized for SSP6
• Frequency Response
  • 100 Hz – 20 kHz, 70.7 / 100V
• Connectors
  • Input: Dante (RJ45) 
  • Output: Euroblock
• Regulatory
  • UL 2043 listed, CE, RoHS
• Weight
  • 1.0 lbs (0.45 kg)
• Dimensions
  • 1.20” H x 6.70” W x 4.31” D (30.4mm H x 170.1mm W x 109.4mm D)

Mezzo offers the same sound clarity, reliability, and overall build quality of any Powersoft install dedicated amplifier platform in a ½ rack unit form factor. It comes in 2 power supply sizes, 2 or 4 channels, and state of the art DSP.

All models offer multiple analog input options, and the 2 channel versions feature line level outputs.

AD versions of Mezzo add audio networking capabilities with DanteTM/AES67 and an internal Gigabit Ethernet switch and a second port so that multiple products can share the same network cable.

The smaller versions of Mezzo are sealed designs, therefore approved for hidden placement, such as mounted above the ceiling or tucked in a wall box.

The included mounting accessories allow multiple options: 1 or 2 Mezzo in a 19” Rack, 1 Mezzo in an 11” rack, wall mount brackets allow it to be mounted on any flat surface, also under a table or in the ceiling. Rubber feet allow Mezzo to be placed on a shelf.

Dante-enabled models:

• Mezzo 322 AD
• Mezzo 324 AD
• Mezzo 602 AD
• Mezzo 604 AD

The Linea Research 44M20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44M20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms.

Linea research 44M Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

For portable applications 44M Series amplifiers can be controlled from the front panel or via PC software. 

The NT series is a range of network-enabled amplifiers designed for installations requiring premium sound quality and high output power.

The NT series network amplifiers offer next-generation D-class amps. The NT1308D is an eight channel amplifier at 130 Watts per channel. NT amplifiers offer a highly efficient power supply that draws less power and produces less heat for saving on energy and air conditioning. Ethernet connectivity ensures complete control of the NT system’s functions regardless of your location, while optional Dante connectivity enables all signals to be routed to remote units with ease.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt1304

The Asystems NT4004 Network Power Amplifier offers fixed installation contractors and integrators a streamlined, cost-effective solution for providing quality audio in multi-zone facilities. The NT4004 comprises four pristine input channels, multi-channel power amp and 40-bit signal processing. Internal signal processors include 10-band parametric EQs, limiters, crossovers and speaker delay compensation. Among the numerous essential audio processors available in the control software, Asystems engineers have thoughtfully included real-time power monitoring/management features that maintain consistent and controlled operating temperature to ensure system reliability for long-term peace of mind. Once you put an Asystems NT4004 in the rack, it stays in the rack.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt4004

The NT series is a range of network-enabled amplifiers designed for installations requiring premium sound quality and high output power.

The NT series network amplifiers offer next-generation D-class amps. The NT1304D is an four-channel amplifier at 130 Watts per channel. NT amplifiers offer a highly efficient power supply that draws less power and produces less heat for saving on energy and air conditioning. Ethernet connectivity ensures complete control of the NT system’s functions regardless of your location, while optional Dante connectivity enables all signals to be routed to remote units with ease.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt1304

The NT series is a range of network-enabled amplifiers designed for installations requiring premium sound quality and high output power.

The NT series network amplifiers offer next-generation D-class amps. The NT2508D is an eight-channel amplifier at 250 Watts per channel. NT amplifiers offer a highly efficient power supply that draws less power and produces less heat for saving on energy and air conditioning. Ethernet connectivity ensures complete control of the NT system’s functions regardless of your location, while optional Dante connectivity enables all signals to be routed to remote units with ease.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt1304

The NT series is a range of network-enabled amplifiers designed for installations requiring premium sound quality and high output power.

The NT series network amplifiers offer next-generation D-class amps. The NT2504D is a four-channel amplifier at 250 Watts per channel. NT amplifiers offer a highly efficient power supply that draws less power and produces less heat for saving on energy and air conditioning. Ethernet connectivity ensures complete control of the NT system’s functions regardless of your location, while optional Dante connectivity enables all signals to be routed to remote units with ease.

https://www.asystems-sys.com/index.php/products/audio-switcher/network-amplifiers/nt1304

The Asystems DMA8813D is an 8x8 1040 watt digital matrix amplifier. Asystems introduces the DMA series digital matrix amplifiers – combining smart signal processing with a flexible modular mixing matrix and robust amplification. Sound complex? It’s not, because all routing and processing is adjusted through the simple yet intuitive software. The DMA series provides racks-full-o-gear in a modest 2U construct. Combining many great products into a simple design, the DMA series simplifies your installation and saves you money. Whether designing or installing systems in auditoriums, restaurants, houses of worship, boardrooms, courtrooms or performance spaces, Asystems has a DMA matrix amplifier that will fit your exact requirements.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-amplifiers/dma8813

The Asystems DMA8825D is an 8x8 2000 watt digital matrix amplifier. Asystems introduces the DMA series digital matrix amplifiers – combining smart signal processing with a flexible modular mixing matrix and robust amplification. Sound complex? It’s not, because all routing and processing is adjusted through the simple yet intuitive software. The DMA series provides racks-full-o-gear in a modest 2U construct. Combining many great products into a simple design, the DMA series simplifies your installation and saves you money. Whether designing or installing systems in auditoriums, restaurants, houses of worship, boardrooms, courtrooms or performance spaces, Asystems has a DMA matrix amplifier that will fit your exact requirements.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-amplifiers/dma8825

The Asystems DMA8413D is an 8x4 520 watt digital matrix amplifier. Asystems introduces the DMA series digital matrix amplifiers – combining smart signal processing with a flexible modular mixing matrix and robust amplification. Sound complex? It’s not, because all routing and processing is adjusted through the simple yet intuitive software. The DMA series provides racks-full-o-gear in a modest 2U construct. Combining many great products into a simple design, the DMA series simplifies your installation and saves you money. Whether designing or installing systems in auditoriums, restaurants, houses of worship, boardrooms, courtrooms or performance spaces, Asystems has a DMA matrix amplifier that will fit your exact requirements.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-amplifiers/dma8413

The Asystems DMA8413D is an 8x4 1000 watt digital matrix amplifier. Asystems introduces the DMA series digital matrix amplifiers – combining smart signal processing with a flexible modular mixing matrix and robust amplification. Sound complex? It’s not, because all routing and processing is adjusted through the simple yet intuitive software. The DMA series provides racks-full-o-gear in a modest 2U construct. Combining many great products into a simple design, the DMA series simplifies your installation and saves you money. Whether designing or installing systems in auditoriums, restaurants, houses of worship, boardrooms, courtrooms or performance spaces, Asystems has a DMA matrix amplifier that will fit your exact requirements.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-amplifiers/dma8425

Asystems introduces the DMP8800D, a unique 8-in x 8-out digital matrix processor that boasts ‘simple integration’ to your existing system. The DMP8800D is built from the ground up on a powerful, open platform. This digital matrix processor transcends all limitations in scope, performance, and usability that tend to mar other network audio control systems.

Essentially, the DMP8800D software provides a means to achieve your project’s goals, regardless of the requirements. Rock-solid performance is backed by brilliant processing that is sure to enhance any audio you may throw at it. All of this combines to make the DMP8800 an ideal solution for boardrooms, conferences, convention centers, houses of worship, legislative installations, performing arts, stadiums and arenas, theme parks and transportation facilities.

https://www.asystems-sys.com/index.php/products/audio-switcher/digital-matrix-processors/dmp8800

The HPA-160D/02 is a Digital audio power amplifier. Its a compact and efficient combination of digital power amplifier and switching power supply.

• Class-D power amplifier with theoretical efficiency over 80%
• Automatic adaptation to all mains voltages world-wide
• Low-heat generation, long service life
• Energy saving and cost efficient
• Operation mode: Stereo/bridge
• 2×SPEAKON socket for loudspeakers
• TM 2×RJ45 jack for digital audio input via Dante networking
• 1 Line In and 1 Line Out (Diameter 6.4 mm phone jack)
• Embedded Web Server for power amplifier configuration (e.g. limiter, EQ and mix) and view of microphone on/off status
• All-round protection from shortcut circuit, direct current and overheating, power supply overload or overheating control

SoundTube Entertainment’s IPD-Hub 2 Amplifier creates an IP-based audio distribution alternative to traditional 70v or 100v audio systems. Designed for small to medium applications, the IPD-Hub 2 combines Attero Tech Axiom endpoints with Dante infrastructure to create a complete IP-based system at a comparable price point to traditional 70v or 100v systems. The IPD-Hub 2 features two-channel DSP amplification with a multitude of power options, including PoE, PoE+, 40W PoE and 24v PS.

The P-Series from Renkus-Heinz represents the pinnacle of performance for compact point-source loudspeakers. Latest generation Complex Conic horn geometry coupled with patented CoEntrant Mid/High driver technology delivers uncompromising detail and extreme sound pressure levels. Advanced amplification, processing, and protection through RH’s own SA Amplifiers provide the ultimate in performance, consistency, and reliability. Application focused loudspeakers and comprehensive accessory packages have been purposefully designed to address the acoustical and logistical challenges of live sound reinforcement from mains and fills, to stage and control room monitoring.

Dante-enabled P Series Models:

• P2-10-RD
• P3-12-RD
• P3-64-RD
• P3-15-RD
• P3-10M-RD

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 30W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP30XXA-2P is powered by standard POE+ and has a MAX power of 30 watts. If there is not  POE+  used,  It can used the external 19VDC power supply.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP3011A-2P] 1 Channel, 30W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP3012A-2P] 1 Channel, 2*15W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP3022A-2P] 2 Channels, 2*15W Output, [2 Pairs Speaker Terminals].

The MONISMS Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers [Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.] The MONISMS Dante Amplifier Power 60W, 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers.
The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol.

MNS-AMP60XXA-2A MAX power 60W,  Which build-in AC 100-240V [50/60Hz] power module.
Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

[Model:MNS-AMP6011A-2A] 1 Channel, 60W Output, [1 Pair Speaker Terminals].
[Model:MNS-AMP6012A-2A] 1 Channel, 2*30W Output, [2 Pairs Speaker Terminals].
[Model:MNS-AMP6022A-2A] 2 Channels, 2*30W Output, [2 Pairs Speaker Terminals].

The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 DAN is a compact digital amplifier with integrated 4 × 4 matrix was developed for media applications and small-scale sound reinforcement. The MA-4.100 is equipped with a Dante UltimoX4 audio input. Despite being very small, the new amplifier features the latest generation of Fohhn DSPs – integrated into both inputs and outputs. The MA-4.100 is perfectly suited for smaller audio applications:

• Conference rooms and -systems
• Small lecture theatres and class rooms
• Hotels and restaurants
• Integration into media boards
• Media sound for displays and videowalls
• Shops and retail
• Fitness centres
• Low-ohm public address systems
• Amusement parks
• Museums and exhibitions
• Delay- and near field amplification within larger systems
• Small churches and community halls

The MONISMS MNS-AMP260AC Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers (Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.)  The MONISMS MNS-AMP260AC Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers (Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.) The MONISMS Dante Amplifier has two outputs,  each with 30W of power into an 4-8Ω load, This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP260AC MAX power 2*30W,  Which build-in AC 100-240V power module. Dante Audio Amplifier can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

The MONISMS MNS-AMP230POE Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers (Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.) The MONISMS MNS-AMP230POE Dante Audio Amplifier is a compact power amplifier module that drives small 4-8Ω speakers (Ceiling Speaker, In-wall Speaker, Pendant Speaker Column Speaker etc.) The MONISMS Dante Amplifier has two outputs, each with 15W of power into an 4-8Ω load. This makes the module ideal for powering small areas consisting of only a few low power speakers. The module's audio input is via an Ethernet audio network, allowing the use of the DANTE/ AES67 audio network protocol. MNS-AMP230POE is powered by standard POE+ and has a MAX power of 30 watts [2*15W]. If there is not  POE+  used,  It can used the external 24VDC power supply. Dante Audio Amplifier  can be mounted on a DIN rail or screwed onto a panel or wall for easy installation in a remote closet near the speaker area.

The D10-1 digital amplifier is a 10 Amp single output class ‘D’ driver; meaning a 60%+ increase in energy efficiency over existing solutions. The D10-1 digital amplifier is a 10 Amp single output class ‘D’ driver; meaning a 60%+ increase in energy efficiency over existing solutions. The driver features capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. The D10-1 features a 10 Amp loop output plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications. The added power of the D10-1 provides a solution for installations in environments containing very high levels of metal, previously not possible without the use of combiners. In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. Features

• Dante Input for Additional Network Audio
• Drives 1 output channels at 10ARMS
• Networkable with remote browser interface
• Digital display & intuitive ‘touch’ menu system
• 3 menu modes; Main, Status & Quick
• Highly energy efficient Class-D amplifier with low heat dissipation
• Up to 1,450m2 Perimeter Loops area coverage
• Compact 1U rack mount unit with internal transformer for simple rack installation
• Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
• AGC & Dual Slope MLC
• Active status monitoring & remote fault reporting via email
• Data compliant with: IEC 62489-1 Standard

Applications include

• Lecture Theatres & Conference facilities
• Stadia, Sports Halls, Cinemas & Theatres
• Courts Rooms, Airports & Railway Stations

MDA2-2500P is a highly flexible, powerful and intelligent 2-Channel power amplifier delivering up to a total of 2x2150W @ 4ohms. MDA2-2500P is a highly flexible, powerful and intelligent 2-Channel power amplifier delivering up to a total of 2x2150W @ 4ohms. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA2-2500P includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 2 output stages use Class D amplifier module-full bandwidth PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA2-2500P is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 2 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.

MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. MDA4-2000PS is a highly flexible, powerful and intelligent 4-Channel power amplifier delivering up to a total of 4x1700W @ 4 ohms and 4x2320W @ 2 ohms, or able to drive 70V Constant Voltage Lines. Designed to meet the most demanding portable and fixed installation sound systems, it provides a full set of value added features such as high output power, efficient cooling system, on board DSP and USB/Ethernet for monitoring and control via PC software. MDA4-2000PS includes a highly efficient Switch Mode Power Supply, which provides power to the output stages. The 4 output stages use the well-proven Class D module-full bandwith PWM modulator obtaining ultra low distortion, high efficiency and also equipped with a full set of circuit protections. Furthermore the Clip/Limiter function provides output monitoring to prevent speaker damage with gentle gain reduction at clip threshold, in addition to the efficient heat dissipation system and Over-Heat protection which themselves ensure uncompromised reliability. MDA4-2000PS is more than just an amplifier. It is also a capable and sophisticated loudspeaker processor, thanks to its powerful MARANI® DSP running 96 kHz / 24 bit [ 96 bits precision for the internal intermediate processes] and high performance 24bit AD/DA Converters. It offers 4 channels of slope up to 48dB/Oct IIR HP/LP crossover filters, or up to 512 taps FIR filters[FIR coefficients can be imported as .txt/.csv file from external application] , RMS compressor, parametric Eqs , alignment delay and white/pink noise internal generator, everything needed to optimize a loudspeaker system.