Dante-enabled Product Catalog

Renkus-Heinz

Renkus-Heinz – SA Series

Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals Renkus-Heinz SA Series amplifiers are designed to provide the cleanest possible sound quality and performance, even with the most complex audio signals. Making their debut with the new C and T Series point source loudspeakers, Renkus-Heinz SA Series amplifiers will ultimately enable all Renkus-Heinz loudspeaker models to be freely combined, offering full networking capabilities, RHAON II control and monitoring, and connection via a choice of Analog, AES/EBU, or Dante single or redundant network input. Renkus-Heinz SA Series amplifiers will be available in three models:

the SA-625 amplifier outputs 500W + 125W
the SA-1250 outputs 1,000W + 250W
the SA2000 delivers a total of 2000W

With power to spare, SA 625 Series amplifiers deliver more than enough Wattage to easily drive additional CX loudspeakers, SA 1250 and 2000 models are equipped with line voltage looping. All SA Series amplifiers are equipped with native DSP, including delay, equalization, multi-channel limiting, and noise reduction, with nine available preset memories. Available connectivity configurations include Analog input, as well as RHAON II control and monitoring Dante with either Single or Redundant network Further, networking connectivity in copper and optical formats.

Amplifiers

See the product

Leonis Cinema

Leonis Cinema – SMA-OBIA

LIDSA32 (Immersive Digital Surround Amplifier-32 Channels) belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. SMA-OBIA belongs to digital input CLASS-D power amplifier, digital interface access system, it adopts digital processing method in the whole process of signal processing and power amplification, in order to promote the speaker ,it uses low-pass filter to extract the analog audio signal in the CLASS. Each digital-analog conversion will produce a loss of sound, SMA-OBIA link reduces DAC conversion link. So our structure is more rational, more integrated. The sound of the output will be direct, dynamic amplitude larger, transient better. It effectively overcomes defects of the traditional analog amplifier (such as big volume, big distortion, low power efficiency, etc.). Its power utilization rate can be up to 95%. Features:

High integration,32 channels output
High power output, attain to cinema level
Digital input interface
32 channels analog output
Over-current protection, overvoltage protection, over temperature protection
Adjust acoustic gain, status display, BTL-PBTL mode switch of per channel by network protocol

Amplifiers

See the product

Glensound

Glensound – VIRGIL

Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones. Virgil was the Roman poet who guided Dante through Hell and Purgatory, the Glensound Virgil is a clever little headphone amplifier for providing crystal clear audio into studio & broadcast headphones. Packaged in a small & robust format and designed to be permanently mounted in studios wherever a headphone circuit is required, the Virgil provides a simple interface between Dante network audio systems and users headphones. The Virgil encompasses our unique headphone amplifier circuit which automatically provides the correct output level to match the impedance of the attached headphones (to produce the same volume high impedance headphones require a much greater output level than low impedance). Virgil receives 2 x audio circuits from a Dante network and routes one to the left and the other to the right channel of the headphone amplifier. A front panel volume control allows the user to adjust the output volume. Three mounting holes are supplied to enable the Virgil to be mounted underneath a studio desk in a suitable location for the users headphones. Needing just 1 single network cable to carry both power & audio to the Virgil makes installation very simple. As well as being suitable for low & high impedance headphones our unique headphone amplifier circuit can be connected to both stereo headphones & mono earpieces, making the Virgil suitable for driving television presenters ear pieces. Features

Dante audio input
Stereo headphone amplifier
Can be used with mono earpieces
Under desk mounting
Small & robust
Powered by PoE
6.35 & 3.5mm headphone outputs
Up to 96K/ 24 bit audio

Amplifiers

Dante Ch: 2 In
24-bit

See the product

Martin Audio

Martin Audio – iKON iK42

The iKON iK42 is a 4-channel power amplifier which combines high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated amplifier for Martin Audio Wavefront Precision line arrays and XE Series stage monitors, the iK42 can also provide multi-channel amplification across the Martin Audio loudspeaker range. The iK42 can deliver a full 5000 watts per channel into 2Ω with all channels driven while remaining highly efficient. Its high efficiency reduces the energy drawn from the mains supply and ensures the power reserves needed to deliver superb sound under arduous live conditions. Ethernet is used for system remote control and monitoring via Martin Audio’s VU-NET software application, while a user friendly front panel interface allows full local control of all features. Dante digital audio network inputs are also provided for digital audio distribution and control. Powerful DSP is fully integrated into the iK42 to provide a multitude of features that ensure maximum performance and worldwide compatibility of XE monitors. It also provides up to 1000 FIR filter taps @ 48kHz on each output channel, which is essential to implement DISPLAY’s wide bandwidth optimisation process in WP line array systems.

Amplifiers

Dante Ch: 4 In
48kHz-96kHz

See the product

Martin Audio

Martin Audio – iKON iK81

The iKON iK81 is an advanced 8-channel power amplifier which combines very high power density with superb audio performance, state-of-the-art DSP and network control. A dedicated controller amplifier for the Martin Audio Wavefront Precision WPM line array, the iK81 can also provide multi-channel amplification across the Martin Audio loudspeaker range. The iK81 can deliver a full 1250 watts per channel into 2, 4 or 8 ohms with all channels driven while remaining highly efficient. Its high efficiency reduces the energy drawn from the mains supply and ensures the power reserves needed to deliver superb sound under arduous live conditions. Ethernet is used for system remote control and monitoring via Martin Audio’s VU-NET software application, while a user friendly front panel interface allows full local control of all features. Dante digital audio network inputs are also provided for digital audio distribution and control. Powerful DSP is fully integrated into the iK81 to provide a multitude of features. It also provides up to 1000 FIR filter taps @ 48kHz on each output channel, which is essential to implement DISPLAY’s wide bandwidth optimisation process in the WPM line array.

Amplifiers

Dante Ch: 8 In
24-bit

See the product

Linea Research

Linea Research – 48M03-Dante

The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 48M03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 8x8
24-bit

See the product

Linea Research

Linea Research – 48M06-Dante

The Linea Research 48M06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 48M06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 4 In
96kHz

See the product

Linea Research

Linea Research – 44C06-Dante

The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. The Linea Research 44C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C06-Dante delivers 1500W per channel into 2 Ohms, 1500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. Linea research 44C Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 4x4
AES67 Enabled

See the product

Linea Research

Linea Research – 44C10-Dante

The Linea Research 44C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C10-DANTE delivers 2500W per channel into 2 Ohms , 2500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. The Linea Research 44C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C10-DANTE delivers 2500W per channel into 2 Ohms , 2500W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. Linea research 44C Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 4 In
96kHz

See the product

Linea Research

Linea Research – 44C20-Dante

The Linea Research 44C20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. The Linea Research 44C20-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all channels driven the 44C20-Dante delivers 5000W per channel into 2 Ohms , 3000W per channel into 4 Ohms, 1500W per channel into 8 Ohms or 70 volt. Linea research 44M Series amplifiers offer 4-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V. For portable applications 44M Series amplifiers can be controlled from the front panel or via PC software.

Amplifiers

Dante Ch: 4 In
AES67 Enabled

See the product

Linea Research

Linea Research – 88C10-Dante

The Linea Research 88C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 88C10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 8x8
24-bit

See the product

Linea Research

Linea Research – 88C03-Dante

The Linea Research 88C03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 88C03-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C03-Dante delivers 400W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 8 In
AES67 Enabled

See the product

Linea Research

Linea Research – 88C06-Dante

The Linea Research 88C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 88C06-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 88C06-Dante delivers 750W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea Research 88C Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 8 In
24-bit

See the product

Linea Research

Linea Research – 48M10-Dante

The Linea Research 48M10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. The Linea Research 48M10-DANTE offers a unique combination of power and audio performance, combined with advanced DSP and network control. With all 8 channels driven the 48M10-Dante delivers 1250W per channel into 2, 4 or 8 Ohms as well as 70 volt. Linea research 48M Series amplifiers offer 8-channels of sonically pure Class D amplification combined with 96kHz digital signal processing and networked control as standard. Highly efficient auto-sensing power supplies support operation from 85V to 240V.

Amplifiers

Dante Ch: 8 In
24-bit

See the product

MC2 Audio

MC2 Audio – Delta 120

Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

MC2 Audio

MC2 Audio – Delta 100

Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

MC2 Audio

MC2 Audio – Delta 80

Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

MC2 Audio

MC2 Audio – Delta 40

Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. Delta Series offers the assurance of MC2’s highest quality audio power amp technology with future proofing via the inclusion of simple to use digital audio networking. A rear panel switch allows the amplifier to accept either four channels of analogue audio or pick up four channels of networked audio, via Dante, which is then converted using 24 bit 96kHz DACs. Connect to a Delta DSP amplifier using a single CAT5 cable to realise a stereo 4 way system with no further external processing required. Switch back to analogue to use as a powerful traditional quad channel amplifier. Run bridged channel pairs or link adjacent inputs for total flexibility in either analogue or digital mode.

Amplifiers

Dante Ch: 4x4
24-bit

See the product

Powersoft

Powersoft – Quattrocanali 1204

Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system. With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

Powersoft

Powersoft – Quattrocanali 2404

Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system. With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

Powersoft

Powersoft – Quattrocanali 4804

Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. Quattrocanali offers the traditionally amazing sound quality and reliability of all Powersoft products. The patented SRM (Smart Rails Management) technology allows to maximize the the efficiency of the system. With Output Powers ranging form 300W to 1200W per channel, in depth control and monitoring capabilities, Quattrocanali is designed to be conveniently tailored to all small to medium sized installation project.

Amplifiers

Dante Ch: 4 In
24-bit

See the product

Ampetronic

Ampetronic – D14-2 Dante

The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. The D Series represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D14-2 Dante digital amplifier is a 14 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. D Series drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio. The D14-2 Dante features 14 Amps per loop output plus ample voltage headroom, making it the most powerful and flexible solution on the market, suitable for a huge range of applications. The added power of the D14-2 Dante provides a solution for installations in environments containing very high levels of metal, or high ceilings previously not possible without the use of combiners. In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D14-2 Dante also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics. Features

Dante input for network audio
Drives 2 output channels at 14ARMS each, featuring accurate and stable 90° phase shift
Networkable with remote browser interface
Digital display & intuitive 'touch' menu system
3 modes; Main, Status & Quick
Highly energy efficient Class-D amplifier with low heat dissipation
Up to 2 x 1,000m2 Perimeter Loops area coverage
Up to 3,300m2 MultiLoop™ Low Loss area coverage
Compact 1U rack mount unit with internal transformer for simple rack installation
Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
AGC & Dual Slope MLC
Active status monitoring & remote fault reporting via email
Data compliant with: IEC 62489-1 Standard

Applications include

Lecture Theatres & Conference facilities
Stadia, Sports Halls, Cinemas & Theatres
Courts Rooms, Airports & Railway Stations

Amplifiers

Dante Ch: 2 In
44.1kHz-48kHz

See the product

Ampetronic

Ampetronic – D10-2 Dante

The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. The D Series represents the global benchmark for digital audio hearing loop systems. The compact, elegant and sturdy units not only feature digital signal processing and networking functionality, but are also the most versatile and powerful solution available. The D10-2 Dante digital amplifier is a 10 Amp dual output class 'D' driver; meaning a 60%+ increase in energy efficiency over existing solutions. D Series drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. Dante versions also feature a Dante specific RJ45 input for plug and play Dante network audio. The D10-2 Dante features 10 Amps per loop output plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications. The added power of the D10-2 Dante provides a solution for installations in environments containing very high levels of metal, previously not possible without the use of combiners. In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D10-2 Dante also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics. Features

Dante input for network audio
Drives 2 output channels at 10ARMS each, featuring accurate and stable 90° phase shift
Networkable with remote browser interface
Digital display & intuitive 'touch' menu system
3 modes; Main, Status & Quick
Highly energy efficient Class-D amplifier with low heat dissipation
Up to 2 x 1,000m2 Perimeter Loops area coverage
Up to 3,300m2 MultiLoop™ Low Loss area coverage
Compact 1U rack mount unit with internal transformer for simple rack installation
Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
AGC & Dual Slope MLC
Active status monitoring & remote fault reporting via email
Data compliant with: IEC 62489-1 Standard

Applications include

Lecture Theatres & Conference facilities
Stadia, Sports Halls, Cinemas & Theatres
Courts Rooms, Airports & Railway Stations

Amplifiers

Dante Ch: 2 In
24-bit

See the product

Ampetronic

Ampetronic – D7-2 Dante

The D7-2 Digital Hearing Loop Amplifier represents the global benchmark for digital audio induction loop systems. Featuring all the benefits of the Standard D14-2 driver with added Dante Input for additional Network Audio. The D7-2 Digital Hearing Loop Amplifier represents the global benchmark for digital audio induction loop systems. Featuring all the benefits of the Standard D14-2 driver with added Dante Input for additional Network Audio. The D Series range consists of 4 class 'D' drivers (3 dual loop output and 1 single output models); meaning a 60%+ increase in energy efficiency over existing solutions. Drivers feature capacitive touch front panels with intuitive menus, built in test signals, and are fully networkable with a Wi-Fi accessible standard browser based control panel for remote set-up, monitoring and email alerts. The D7-2 Dante features 7 Amps per loop output respectively plus ample voltage headroom, making it the most flexible solution on the market, suitable for a huge range of applications. In another first for high-power Class D Induction Loop drivers, installation can be performed with total confidence, as unique multi-stage filtering ensures compatibility with both other system equipment and global EMC regulations. The D Series also boasts Dual slope Metal Loss Control that caters for a wide range of metal loss frequency characteristics. Features

Dante Input for additional Network Audio
Single or dual output options. Dual outputs featuring accurate and stable 90° phase shift
Networkable with remote browser interface
Digital display & intuitive 'touch' menu system - 3 modes; Main, Status & Quick
Highly energy efficient Class-D amplifiers with low heat dissipation
Up to 2 x 650m2 Perimeter Loops area coverage
Up to 3,300m2 MultiLoop™ Low Loss area coverage
Compact 1U rack mount unit with internal transformer for simple rack installation
Optimised for speech frequencies with unmatched intelligibility & capable of high quality musical reproduction
AGC & Dual Slope MLC
Active status monitoring & remote fault reporting via email
Data compliant with: IEC 62489-1 Standard

Applications include

Lecture Theatres & Conference facilities
Stadia, Sports Halls, Cinemas & Theatres
Courts Rooms, Airports & Railway Stations

Amplifiers

Dante Ch: 2 In
24-bit

See the product

AD-Systems

AD-Systems – NT4-K6

The NT4-K6 Engine offers a 4in 4out topology. With 6000W flexible power, FIR Filter and all available DSP technology, It provides a networkable, highly sophisticated DSP and amplifier solution. This ensures worldwide optimal performance with every Loudspeaker System. The NT4-K6 four channel amplifier was developed for mobile and installed applications which requires medium power. It has the same DSP Engine as the NT4-DSP and the NT3-K4. With setups for all AD-Systems products and even customized settings, this amplifier is a perfect choice. The NT4-K6 has Delays in the input and output of 500msec each, RMS- and Peaklimiters, FIR Filters, an open Edit Architecture for custom settings, and many features more.

4in 4out Powered Loudspeaker Controller
4 x 1.600W @ 4 Ohms
Active PFC for worldwide Operation
Presets for all AD-Systems products on board
Open Edit Architecture for Custom Setups
Future-upgradeable
Dante™ Audio

Amplifiers

See the product

Monacor

Monacor – PA-900DT

The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. They are able to receive one digital stereo signal or two mono signals via the RJ45 connections. These signals are converted into an analogue audio signal, amplified and then streamed. Thus, it is possible to integrate an analogue speaker system into a digital Dante network.

Amplifiers

See the product

monacor-international-akb-160dt_1200px|monacor-international-akb-160dt_1200px

Monacor

Monacor – AKB-160DT

The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. The well-known and reliable amplifier systems PA‑900 and AKB‑160 now feature a 2-channel Dante™ module which turns them into Dante™ instreamers for versatile applications. They are able to receive one digital stereo signal or two mono signals via the RJ45 connections. These signals are converted into an analogue audio signal, amplified and then streamed. Thus, it is possible to integrate an analogue speaker system into a digital Dante network.

Amplifiers

See the product

Dante-enabled Product Catalog

Categories 1

Manufacturer

Features

Specifications

Renkus-Heinz – SA Series

Leonis Cinema – SMA-OBIA

Glensound – VIRGIL

Martin Audio – iKON iK42

Martin Audio – iKON iK81

Linea Research – 48M03-Dante

Linea Research – 48M06-Dante

Linea Research – 44C06-Dante

Linea Research – 44C10-Dante

Linea Research – 44C20-Dante

Linea Research – 88C10-Dante

Linea Research – 88C03-Dante

Linea Research – 88C06-Dante

Linea Research – 48M10-Dante

MC2 Audio – Delta 120

MC2 Audio – Delta 100

MC2 Audio – Delta 80

MC2 Audio – Delta 40

Powersoft – Quattrocanali 1204

Powersoft – Quattrocanali 2404

Powersoft – Quattrocanali 4804

Ampetronic – D14-2 Dante

Ampetronic – D10-2 Dante

Ampetronic – D7-2 Dante

AD-Systems – NT4-K6

Monacor – PA-900DT

Monacor – AKB-160DT

Stay connected to Dante

Support

Company

Dante Networking Alliance

Dante-enabled Product Catalog

Activating Third Party Apps