Dante-enabled Product Catalog
The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks.
The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your MIDAS M32 or BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks. Based on information technology standards, Dante provides uncompressed, multichannel digital media networking, with low latency and synchronisation. By focusing on flexible interoperability on an existing IP network infrastructure, Dante has been widely accepted and adopted by many pro audio manufacturers.
This product has reached end-of-life and is discontinued
The Mackie DL 32 Expansion card connects the DL32R 32-Channel Digital Live Sound mixer to any Dante-enabled network. With 32x32 channels of Dante I/O, the user can route Dante inputs like microphones and other sources to any channel on the DL32R, or send DL32R signals to Dante-enabled loudspeaker systems and amps.
The card features two Dante ports for daisy chaining or open system redundancy, and a dedicated Wi-Fi control port that eliminates the need for an Ethernet switch in many situations.
This product has reached “end-of-life”.
Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion.
This product has reached “end-of-life”.
Optional conversion of Analog Server (HHS 108/116/124/132) to Dante™ 32 mono / 16 stereo inputs. Server unit must be returned to Williams Sound for conversion.
The HY144-D is a digital I/O card for HY card slots, and is compatible with the Dante digital audio network over Gigabit Ethernet connections.
- 24-bit, 32-bit
- 44.1kHz-96kHz
The Roland XI-DANTE expansion interface card enables the Roland ORCHA series of products such as the
M-5000 live mixing console, full-duplex two-way communication on a maximum of 64 channels at 48kHz (32 channels at 96kHz). The card contains primary and secondary ports to allow for redundancy or daisy-chained Dante-enabled devices, and a control port.
It’s the way to add Millennia preamps to your Dante network. Any HV-3D ever made can have this option installed (digital option required). RedNet compatible.
- Dante Ch: 8 Out
- 16-bit, 24-bit
It’s the way to add Millennia preamps to your Dante network. Any HV-3R ever made can have this option installed (digital option required). RedNet compatible
The DN32-DANTE expansion card provides up to 32 channels of bidirectional, networked audio to your
MIDAS M32 or
BEHRINGER X32 mixing console for seamless integration with Dante enabled IP networks. Based on information technology standards, Dante provides uncompressed, multichannel digital media networking, with low latency and synchronisation. By focusing on flexible interoperability on an existing IP network infrastructure, Dante has been widely accepted and adopted by many pro audio manufacturers.
Overview
- Audinate Dante* expansion module for MIDAS and BEHRINGER digital consoles
- Up to 32 bidirectional channels @ 48 kHz
- Enables multichannel recording and playback via Dante Virtual Soundcard* (PC or Mac* computer)
- Primary and secondary Ethernet interfaces for dual-redundant Dante networking
- Operates from internal Dante network Precision Time Protocol (PTP) clock
- Optional Dante Controller software for remote confi guration (PC or Mac* computer)
- LED indicators monitor network activity and speed
- 3-Year Warranty Program**
- Designed and engineered in England
The M32 is a live performance and studio recording digital console with up to 40 simultaneous input channels. It includes 32 award-winning MIDAS microphone preamplifiers, 25 time-aligned and phase-coherent mix buses and Dante network connectivity when including the
DN32-DANTE card.
By installing the DN32-DANTE card in place of the DN32-USB card, your M32 will interface with Dante networks using virtually any 100Mbit/s or Gigabit Network infrastructure with DSCP-based QoS – providing dependable multi-channel audio that coexist with other IP-based data traffic on the same network. The DN32-DANTE card utilizes 24-bit signal transmission with sample-accurate synchronization and low latency, ensuring the highest audio integrity. And a secondary input allows you to set up a seamless, redundant network. Full remote control of the M32 is possible using the integrated Ethernet switch. When the DN32-DANTE card is connected to a computer, Audinate’s Dante Controller application gives you full control over configuration and signal routing among your Dante-enabled devices.
The Sennheiser Dante™ card for the EM 9046 receiver enables its top-of-the-range Digital 9000 microphone system to be integrated into Dante audio-over-IP networks.
The EM 9046 DAN extension card inserts into the EM 9046 eight-channel receiver expansion slot. Sixteen audio inputs can send both digital audio and command signals over the Dante network using the card. Two Gbit RJ45 sockets are provided that serve to establish two redundant network circuits or daisy-chain the signals. Sampling rates of 44.1/48/88.2 and 96 kHz at a resolution of 24 bits are possible with the card.
Download firmware for Digital 9000 Microphone System to support Sennheiser EM 9046 DAN Dante option card
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications.
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in DYNACORD PowerH amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
Dante card for FORUM console.
Dante card for
FORUM console.
- Dante Ch: 32x32
- AES67 Enabled
The RCM-28 Remote Control Module is a two-channel digital controller module for live sound reinforcement, PA and fixed installation applications. The module can be used in Electro-Voice Tour Grade amplifier models. Installing the RCM-28 turns a conventional amp into a remote amplifier, which, at any time, provides complete overview of the overall system status and control of all system parameters. RCM-28 modules allow the integration of amplifiers into an OMNEO network with up to 100 devices in a single subnet without additional hardware. OMNEO is a media networking architecture for professional applications. Using standard IP Ethernets, media products that integrate OMNEO can be assembled into networks of 2 to 10,000 cooperating devices that exchange studio-quality synchronized multichannel audio and share common control systems. This offers the possibility to control and monitor an entire sound system from one or more PCs using the IRIS-Net - Intelligent Remote & Integrated Supervision - software package. In addition to digital signal processing functions, the RCM-28 also offers a digital audio input (AES/EBU), OMNEO network audio inputs and outputs, and freely programmable control inputs and control outputs.
32 in, 32 out Dante interface card for EV Netmax
32 in, 32 out Dante interface card for EV Netmax
Features:
- Connect NetMax to a Dante digital audio network
- Transmit up to 32 ins and 32 outs at 48 or 96 kHz sample rate and 16-, 20-, or 24-bit word-length
- Low latency (typically below 1 ms)
- Two Gigabit Ethernet interfaces for system redundancy
- Status LEDs for each interface
- Dante Zen device-discovery
- Compatible with Dante Virtual Soundcard
- Dante Ch: 32x32
- 16-bit, 24-bit
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card for PowerMatch configurable professional power amplifiers provides 8 input channels of low-latency digital audio using the Dante audio networking solution from Audinate®. Eight output channels are available for diagnostic monitoring from remote locations.
The Dante network card is installed into the digital expansion slot of the amplifier and includes a primary and secondary Gigabit Ethernet port. The secondary port can be configured for switched (default), redundant, or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®.
The Dante network card for fixed-I/O ControlSpace engineered sound processors provides 16 input and 16 output channels of low-latency digital audio using the Dante audio networking solution from Audinate®. The Dante network card is installed into the digital expansion slot of the processor and includes primary and secondary Gigabit Ethernet ports that can be configured for switched (default), redundant, isolated or filtered for legacy product network connections. Up to 10 devices can be daisy-chained using the switched port configuration.
The Digital Audio Labs Livemix LM-Dante-EXP allows the Livemix Personal Mixer to integrate seamlessly with a Dante audio network as part of the Livemix Personal Monitoring System.
The DigiCo SD-Dante-8 Module offers 8 input and 8 output channels when added to DigiGo SD racks, including the SD-Rack, SD-Mini Rack, and SD-Nano Rack. These racks support DiGiGo's SD consoles including the various versions of the SD5, SD7, SD8, SD9, SD10 and SD11 consoles.
- Dante Ch: 8x8
- 48kHz-96kHz
The Studer D21m Dante card is a 64 x 64 interface between a Studer Vista or OnAir console (OnAir support with OnAir SW v6.1) and any Dante compatible device from HARMAN or other 3rd party manufacturers.
The Studer D21m DanteTM card needs a double slot in the D21m frame which is connected to the console’s core. This makes a Studer console a part of a Dante network.
Dante® Digital Interface For Ashly equipment (Factory Installed)
The Dante Accelerator audio interface card (Yamaha AIC 128-D) can be installed in the computer running the Nuendo DAW to provide extra low-latency transfer of as many as 128 simultaneous channels of audio data, for a distinct performance advantage when communicating with Nuage I/O units.
The Dante Accelerator audio interface card (Yamaha AIC 128-D) can be installed in the computer running the Nuendo DAW to provide extra low-latency transfer of as many as 128 simultaneous channels of audio data, for a distinct performance advantage when communicating with Nuage I/O units. The Dante Accelerator card also features a secondary port that can be used to provide redundant connections for failsafe reliability.
Where to Buy: Yamaha Dante Accelerator AIC128-D PCIe-R Card
The KT-DANTE64 Network Module is a groundbreaking, Ethernet compliant audio networking module, compatible with the KLARK TEKNIK DN9650 and DN9652 Network Bridges.
- Dante Ch: 64x64
- 16-bit, 24-bit, 32-bit
The Dante-enabled DAN-1 digital server networking card functions as a gateway interface to support 64x64 channels of Dante networked audio.
The CDN64 Dante™ Audio Bridge Card provides third-party Dante enabled digital audio products the ability to integrate into the Q-SYS Ecosystem. It provides a bridge for up to 64 x 64 channels of Dante audio into the Q-SYS Ecosystem for advanced processing redistribution over larger LAN and WAN IT infrastructures.
The X32's expansion slot provides flexible and expandable connectivity for many different applications. The X-DANTE Expansion Card can easily be installed in place of the X-USB card that is included with the
X32. The 32-channel 48 kHz bi-directional audio interface brings even more I/O options to the X32 by making it ready for integration with Dante-enabled IP networks.
